• Square Steel Tube
  • Square Steel Tube
  • Square Steel Tube
  • Square Steel Tube

Square Steel Tube

Application: Application: Mainly used for high-temperature fluids transmission (water, steam and other high-temperature fluids)

We're here to help: Easy ways to get the answers you need.

  • Introduction
  • Specification
  • Application
  • Inquiry

Introduction:

Pipe Type:Structural Pipe ,Structural Seamless Pipe,Seamless Structural Pipe
Application:In Structural Engineering And Construction Industry
Specification:OD:1/8"-26"(10.3-660mm)
                          WT:SCH10-160,SCH STD,SCH XS,SCH XXS                           
 LENGTH:Fixed Length(5.8/6/11.8/12mtr),SRL,DRL                                       
 Standard:ASTM A53/A252/A500/A501,J1S G3444,EN 10210/10219                       
  Ends:Square Ends/Plain Ends(straight cut,saw cut,torch cut),Beveled/Threaded Ends   
Surface:Bare,Lightly Oiled,Black/Red/Yellow Painting,Zinc/Anti-corrosive Coating   
 Packing:Bundled/In Bulk,Plastic Caps Plugged,Waterpoof Paper Wrapped

Specification:

Classification

Types Application
Structure Purposes General structure and mechanical
Liquid Services Petroleum, gas and other fluids conveying
Low and Medium Pressure Steam and boiler manufacturing
Hydraulic Pillar Service Hydraulic support
Auto Semi-shaft Casing Auto sem-shaft casing
Line Pipe Oil and gas conveying
Tubing and Casing Oil and gas conveying
Drill Pipes Well drilling
Geological Drilling Pipe Geological drilling
Petroleum Cracking Tubes Furnace tubes, heat exchangers

Standard, Chemical Components, Mechanical Properties
Standard Grade Chemical Components (%) Mechanical Properties
ASTM A53 C Si Mn P S Tensile STrength(Mpa) Yield STrength(Mpa)
A ≤0.25 - ≤0.95 ≤0.05 ≤0.06 ≥330 ≥205
B ≤0.30 - ≤1.2 ≤0.05 ≤0.06 ≥415 ≥240
ASTM A106 A ≤0.30 ≥0.10 0.29-1.06 ≤0.035 ≤0.035 ≥415 ≥240
B ≤0.35 ≥0.10 0.29-1.06 ≤0.035 ≤0.035 ≥485 ≥275
ASTM A179 A179 0.06-0.18 - 0.27-0.63 ≤0.035 ≤0.035 ≥325 ≥180
ASTM A192 A192 0.06-0.18 ≤0.25 0.27-0.63 ≤0.035 ≤0.035 ≥325 ≥180
API 5L PSL1 A 0.22 - 0.90 0.030 0.030 ≥331 ≥207
B 0.28 - 1.20 0.030 0.030 ≥414 ≥241
X42 0.28 - 1.30 0.030 0.030 ≥414 ≥290
X46 0.28 - 1.40 0.030 0.030 ≥434 ≥317
X52 0.28 - 1.40 0.030 0.030 ≥455 ≥359
X56 0.28 - 1.40 0.030 0.030 ≥490 ≥386
X60 0.28 - 1.40 0.030 0.030 ≥517 ≥448
X65 0.28 - 1.40 0.030 0.030 ≥531 ≥448
X70 0.28 - 1.40 0.030 0.030 ≥565 ≥483
API 5L PSL2 B 0.24 - 1.20 0.025 0.015 ≥414 ≥241
X42 0.24 - 1.30 0.025 0.015 ≥414 ≥290
X46 0.24 - 1.40 0.025 0.015 ≥434 ≥317
X52 0.24 - 1.40 0.025 0.015 ≥455 ≥359
X56 0.24 - 1.40 0.025 0.015 ≥490 ≥386
X60 0.24 - 1.40 0.025 0.015 ≥517 ≥414
X65 0.24 - 1.40 0.025 0.015 ≥531 ≥448
X70 0.24 - 1.40 0.025 0.015 ≥565 ≥483
X80 0.24 - 1.40 0.025 0.015 ≥621 ≥552

Standard Grade Chemical composition Mechanical Properties
C Si Mn P S Cr Ni Cu Tensile Strength(Mpa) Yield Strength(Mpa) Elongation(%)
GB/T8163 10 0.07-0.14 0.17-0.37 0.35-0.65 ≤0.035 ≤0.035 ≤0.15 ≤0.25 ≤0.25 335-457 ≥205 ≥24
20 0.17-0.24 0.17-0.37 0.35-0.65 ≤0.035 ≤0.035 ≤0.25 ≤0.25 ≤0.25 410-550 ≥245 ≥20
Q345 0.12-0.20 0.20-0.55 1.20-1.60 ≤0.045 ≤0.045 - - - 490-665 ≥325 ≥21

Tolerance

Pipe types Pipe Szie(mm) Tolerances
Hot rolled OD All ±1% (min ±0.50mm)
WT All +15%, -12.5%
Cold drawn OD 6~10 ±0.20mm
10~30 ±0.40mm
30~50 ±0.45mm
>50 ±1%
WT ≤1 ±0.15mm
>1~3 +15% -10%
>3 +12.5% -10%

 

End Finish Type

Plain End Wall Thickness less than 0.5 inch, including SCH STD & SCH XS
Plain End (Square Cut) Wall Thickness over 0.5 inch, including SCH XXS
Beveled End Wall Thickness less than 0.5 inch, including SCH STD & SCH XS
Couplings Outside Diameter equal or less than 2''
Thread Protection Outside Diameter over 4 inch

 
 
 
 
 
 

Application:

Application: Mainly used for high-temperature fluids transmission (water, steam and other high-temperature fluids)

Please fill in your procurement needs and contact information